Видео

Indeed, there is a tool that only does the job, and there is a tool that does the job perfectly, but this one not for me. i fish from shore thanks master

Good job man i like DIY too, and I make anything my home needs, also all maintenance work it's a hobby for me. I have a room full of equipment you can't imagine😂 By the way, these are nice knives it's only for professionals 👌

What's the diameter of the wire? And where did you get them? And Soft or hard?

Yes, I saw this trip. The temperature was high and the water was still, without air or current, as well as algae But it was still a good trip that I enjoyed and learned from

What's the diameter of the wire? And where did you get them? And Soft or hard?)

Every angler needs to understand how to treat his gear especially the rod. Good topic as always, please do more of this. Thank you master

Is it better to have the line connected to the split ring or eye of the jig directly . I was told better connect to split ring as it improves hookup rates,Is that true?

Say, if i lay the assist line on the hook shank without making a knot around it or letting it pass through the hook and then i fix the thread, will it slip you think?

I used the same assist line ss Gou40 , and the same gamakatsu hooks! They are crazy sharp super fast penetration :)

Good work as usual In this one, you're puted the stoper knots a far away, and you didn't stop with the hook point like you're usually do and you tell me earlier that's because don't make a gap in fish meat and I know you aren't a random guy so why you did that in this particular one master

You summed up everything that can be said with the Ferrari example Good point master 👌👍

I just bought one of these jigs when I was visiting Guam but I generally fish for big bluefin tuna in California. I was thinking it would be a good option for a heavy jig that isn’t too long for the night bite. Generally we fish speed jigs that are in the 250-500g range but many of those are long and I feel like even with the correct hook setup cause missed hookups so I thought this might work well. How do you fish it generally? The guys lately have even been just putting assist hooks on 16 oz wire through sinkers and getting a better hookup ratio because they get down to 500 ft quickly and have and have a small profile for less misses but they have little to no action so I’m hoping this will be an improvement to that.

Thank you for the video

Hola ! I'm Fabio from Ibiza, thanks for your videos . For tuna you don t use never a little octupus on the hook? What do you think? Thanks

Circle hook no good, the fish get outs, I use the others hook is better 🐟🐟

Sir parequest po how to tie spade hooks with eye for fast and slow jig. TIA🙏🏽

Excellent work, and I feel it will work for me. I appreciate everything you do on the channel thanks master

Ok, I am brand new to fishing ; you are a good honest teacher. Salt water is what I'm interested in, I live in Florida. This video as well as your others help a lot. I'm sure I'll find out later, but do you need a leader. Is the line your using too thin for one. Anyway thanks again for this, and all the hard work you put in.

That’s great! Looking forward to seeing what happens! Thanks for looking in to this!🤙

For 8kg split rings is there a specific size pliers please?

Thank you for the tips

You are always offering different things on your channel. Always full of useful ideas and advice, mentioning the details and why this or that, and this is what makes you the most distinguished from others. Thank you Mr.Kit

Thanks for all your replies!🤙

Great vid Kit Master! There’s also something very ‘Zen’ about the gentle art of Sabiki lure fishing and my favourite method of collecting baitfish before a session or just a thing and snap freezing for future use. Thanks for this one mate. And special thanks to your special childhood mentor for allowing you to hand the knowledge and technique down. I’ll be certainly making up a couple of these rigs in his honour! Best Regards as always Kit, Charles, Cairns.

Hi what is the color’s name of the green one you’re displaying ?

I have a blue max with a flipping switch. I have no idea what gen it is like a 2 or 3 …what spool would I need? Thanks much appreciated.

Hey mate. Loving the videos! The adajo, you seemed to rate it. They seem good for yhe price and s true slow pitch rod. If im fishing say 60-80 metres with fairly high current, would you siggest this for a good startjng point? I currently have two other rods and looking at a third to work in a heavier current situation. I currently have a pro hunter slow rider pe2.5 and a oceans legacy elementus slow in pe2. Typically I use about 130-180gram jigs but at times a vertical jig is difficult with the current we get here. Watcing your videos I'll need to get some smaller profile jigs and possibly a stronger rod. I currently run saltiga 12 in pe2.

Hey mate. Loving the videos! The adajo, you seemed to rate it. They seem good for yhe price and s true slow pitch rod. If im fishing say 60-80 metres with fairly high current, would you siggest this for a good startjng point? I currently have two other rods and looking at a third to work in a heavier current situation

Good tutorial as always, thanks, Mr. Kit 🙏 You can put your accelerator solution in a small spray bottle for easy application to keep the spray away from the camera and the vise

What lure is the pink one called

Thanks for the great tutorial.. just wondering how much should be the length of the leader between the fly and the qtip?

Top water is a must for saltwater.

Kit whats the snap brand that you mentioned in previous vid thats welded snaps. All snaps in my area are non welded. Thanks!

Update: 5.8 gear ratio and even lighter for inshore jigging I been using now is the Daiwa Airity. 150g and it's just awesome. It's WAYY more expensive but really love the weight savings for all day jigging. I love the shallow spool too. I updated the handle to Titanium with ceramic bearings, and ceramic bearings for the spool bearing. Also changed the felt to Carbontex washer and I can and have landed everything inshore. 😊

Great break down? Question can I use a shimano Ocea jigger for bottom fishing??

It's a good idea to keep a couple of these in my gear to use when there are toothy fish around, Like you said, it is better to have it than not. It is like an emergency plan Thank you master 👍

I usually will misplace the screw in bag. So what I will do is scotch tape the spare to the base.

Nice, what is the weight of the spool (including drag ) for the L30, L50 and L80?

Hey Kit, do you recommend a specific type of threading for tying assist hooks. or is it the same as the stuff used for flies, which there seems to be a variety on that too. seems like a good topic for a video if you haven't already done it. if you have already, can you point me in that direction. Thanks for all the knowledge Kit, you're making a big impact on the fishing community.

Very cool idea, I have something that I made from a grill rotisserie motor, but that unit looks like it will be really nice, because it already has everything needed to make the spinning resin leveling machine. Thanks for posting about this. I am going to grab one of those to try out for myself. :)

This is my first time seeing this rigging type thanks master And why is it not igfa legal? is that because catch & Release rules?

What's up. Likes are still hidden on my side. Checked on different apps and browsers now.

Sir grabi solid kaayo sa kaalaman..idol

Good work, more tips and a lot of details on this one. Thank you Mr. Kit And please tell Wael thanks and tell him to send more jigs so we can learn more while you work on them 😃

Mate I think I’d watch you assemble ikea furniture 😂🤣😂🤣😂🤣😂

Thanks a lot for this, was very informative and was nicely done. Love your work ,learning a lot and have been encouraging my fellow anglers here in uae to follow and learn from you.

Thanks a lot sir, I suggest if swivel was in the middle of wire I think it will be more freely.

Thanks a lot, that was very informative and just what I was looking for. Learning a lot from your videos, I'm based in dubai and following your videos regularly and encouraging my fellow anglers to learn from you too.

Heartwarming story. Thank you for sharing!